OUR SOLUTIONS FOR YOUR ULTRASONIC TESTING (NDT UT / PA)
Flyingvision initially specialized in the development of deployment methods for ultrasonic systems, mainly through the development of custom carriers for specific applications (magnetic UT crawler, UT drone, portable UT scanner, robotic UT scanner). Therefore, we decided to develop a standard range of carriers, scanners, rovers, and deployment systems for ultrasonic solutions (conventional ultrasound, phased array, TOFD, etc.).
To offer the most integrated and comprehensive solutions possible, it was clear to us that we needed to develop our own ultrasonic testing solution. We have thus created a UT card available in several versions and integrable in all our solutions of carriers, scanners, crawlers, robots, and also in OEM version for specific customer needs. Our tools and different systems remain, however, compatible with market ultrasonic systems.
Come discover our range of products and accessories dedicated to professionals in non-destructive ultrasonic testing UT / PA.
Manual UT Scanners
RUC
Ultrasonic B-Scan manual scanner
The RUC1 is an ultrasonic B-scan runner specially developed to meet the challenges posed by inspections of elements at heights less than 10 meters, which usually require expensive means or involve significant risks for personnel.
UT Ultrasonic Cards
MUE
Embedded Ultrasonic Module
Immerse yourself in the world of MUE, where ultrasonic testing meets embedded technology, creating a versatile solution for robotic applications and a multitude of industrial scenarios.
Non-Destructive Testing with Ultrasonics
General Principle of Ultrasonic Testing
Control Issues
Guidance and Precision in Control
When inspecting welds, it is imperative to maintain a predetermined positioning of the probe relative to the weld to ensure detectability of any defects. Guidance systems, or manual scanners, more or less complex, become mandatory to ensure the conformity of the control.
The modularity of this type of guidance and positioning system for your PA or UT probes is very important, as each weld configuration requires adapting the probe holder tooling.
Field Inspection and Control in Hard-to-Reach Areas
Serial Inspection and Control in Workshop or Laboratory
Associated Standards for Ultrasonic Testing – UT testing
NF EN 17635: Non-destructive testing of welded joints – General rules for metallic materials (A 89-500)
NF EN ISO 16810 Non-destructive testing – Ultrasonic testing – General principles
NF EN ISO 16811 Non-destructive testing – Ultrasonic testing – Sensitivity and time base setting
NF EN ISO 16823 Non-destructive testing – Ultrasonic testing – Transmission technique
NF EN ISO 16826 Non-destructive testing – Ultrasonic testing – Testing of discontinuities perpendicular to the surface
NF EN ISO 16827 Non-destructive testing – Ultrasonic testing – Characterization and sizing of discontinuities
NF EN ISO 16828 Non-destructive testing – Ultrasonic testing – Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
NF EN 12668-1 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 1: Instruments
NF EN 12668-2 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 2: Probes
NF EN 12668-3 Non-destructive testing – Characterization and verification of ultrasonic testing equipment – Part 3: Complete equipment
NF ISO 12715 Non-destructive testing – Ultrasonic testing – Reference blocks and test procedures for the characterization of acoustic beams of probes used in contact testing
